These are standard graphic airbrush colors that come out opaque right from the bottle when using a 0.5mm airbrush tip. They're a water - based airbrush paint suitable for all airbrushing needs. Crafted with lightfast pigments and a tough yet flexible acrylic resin, they give a soft - hand feel on fabric. These fluid acrylic colors are specially designed for airbrush and spray - gun application. Compared to Wicked Colors and Illustration Colors, which are great for fine - line work with small tip - sizes at low psi, Createx Airbrush Colors cover and spray best with larger tip - sizes at higher psi settings (35 – 45+ psi). They dry to a semi - gloss finish and can cover opaque in 2 – 3 coats. They're not ideal for tip - sizes smaller than 0.35mm, even when thinned with 4011 Reducer. For spraying through medium and small tip - sizes down to 0.18mm at under 20 psi, Createx Illustration Opaque Colors are a better choice. Brand: Createx Colors.

Using these Createx AB Opaque Airbrush Colors is quite straightforward. First, if you're using a 0.5mm or larger tip - sized airbrush, you can use the paint straight from the bottle. Just set your airbrush to a higher psi, around 35 – 45+ psi, and start spraying. It'll take about 2 - 3 coats to get an opaque finish. If you want to use a smaller tip - size airbrush, you need to thin the paint with 4011 Reducer. But keep in mind, these colors work best with larger tip - sizes, and they're not recommended for tip - sizes smaller than 0.35mm. When it comes to storage, keep the paint in a cool, dry place. And if you're done using it for the day, clean your airbrush thoroughly to prevent clogs. If you need to paint with smaller tip - sizes at lower psi, consider switching to Createx Illustration Opaque Colors.